Yard Insight
Planters, Raised Beds & Greenhouses

Polycarbonate vs Glass Greenhouse for a Cold Winter

Published · Updated

This post may contain affiliate links. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure

In the polycarbonate vs glass greenhouse choice for a cold winter, twin-wall polycarbonate is usually the more practical pick. Washington State University Extension lists double-wall polycarbonate at an R-value of 1.6 to 1.7, against 0.9 for single-layer glass, and the Royal Horticultural Society describes polycarbonate as resistant to breakage and durable in adverse weather. Glass wins on light: the RHS puts it at 90 percent transmission against 83 percent for clear polycarbonate, and it does not degrade in sunlight. If you want glass in a hard-winter climate, double glazing closes most of the insulation gap, but it costs light.

That is the short answer. The longer one matters because "glass looks better, but will it survive a real winter?" is really three questions: how much heat it holds, how much snow and impact it takes, and how much light you give up for either.

Where these numbers come from

Every number on this page comes from two sources, both read on October 2, 2026:

We also quote North Carolina State Extension's Extension Gardener Handbook appendix on season extenders and greenhouses for two points on glass strength and framing. Most other pages on this question are written by companies that sell one glazing or the other, and their figures vary from page to page. We have left those numbers out. When you compare actual kits, the panel maker's own datasheet for that product is the number to trust.

Polycarbonate vs glass greenhouse: the side-by-side

Polycarbonate vs glass greenhouse: the side-by-side

From the WSU Extension covering-materials table:

Glazing Light transmission R-value (higher insulates better) Service life as WSU states it
Single-layer glass 85 to 90% 0.9 Indefinite if not broken
Factory-sealed double glass 70 to 75% 1.5 to 2.0 (2.5 with low-e) Indefinite if not broken
Double-wall polycarbonate 83% 1.6 (6 mm), 1.7 (8 mm) Good performance for 7 to 10 years
Triple or quad-wall polycarbonate 75% 2.0 to 2.1 (8 mm), 2.5 (16 mm) Good performance for 7 to 10 years

Read the table across, not down. Every step up in insulation costs light, whether you get there with more glass panes or more polycarbonate walls. There is no glazing on this list that is both the clearest and the warmest.

Heat: why twin-wall holds more of it

Twin-wall polycarbonate is two thin plastic skins held apart by internal ribs. NC State's handbook describes rigid double-layer sheets of acrylic or polycarbonate as "separated by webs." The trapped air between the skins is what lifts the R-value.

Single glass has no such air layer, which is why WSU lists it at 0.9. The RHS does credit glass with something polycarbonate lacks: it "reflects heat radiated from within the glasshouse back into the structure instead of being lost." That is a real advantage, but it does not change the overall ranking in the WSU table.

What this means in a cold winter. If you plan to heat the greenhouse, insulation is where your running cost lives, and twin-wall or multi-wall polycarbonate is the cheaper shell to keep warm. If you plan to leave it unheated, the gap matters less than you might hope: no glazing turns an unheated greenhouse into a frost-free one in a hard freeze.

Snow and impact: the part that breaks

Snow and impact: the part that breaks

Glass. WSU's table lists single glass as "Fragile, easily broken" and notes it "May not withstand weight of snow." Tempered glass helps: NC State says tempered glass "is frequently used because it is two or three times stronger than regular glass," and WSU notes tempered glass needs fewer support bars. The RHS adds a safety rule worth following in any family yard: "Toughened glass should be used for doors and anywhere where people might fall onto the glass."

Polycarbonate. The RHS describes polycarbonate sheeting as "resistant to breakage, lightweight, durable in adverse weather," and WSU calls double-wall polycarbonate "very strong." That is why polycarbonate is the usual recommendation where hail and falling branches are a worry.

Snow load is a structure question, not just a glazing question. Whether a greenhouse survives snow depends on the frame, the roof pitch and the panels together, and on how much snow your area gets. WSU notes that "Local zoning regulations may specify snow load requirements for greenhouse structures." Before you buy any kit for a snowy climate, find the maker's own snow-load statement for that exact model, then ask your local building or zoning office what applies where you live. Do not assume a glazing type tells you either answer.

The trade-off with light weight. Polycarbonate's low weight is a plus for frames and a minus in wind. A lighter greenhouse depends more on its anchoring and on panels being fixed exactly as the manual describes. Anchoring is a separate decision with its own rules, set by your model's manual and local conditions.

Light: what you give up with polycarbonate

The RHS is blunt about it: glass "lets 90 percent of light through, does not degrade in sunlight," while "clear polycarbonate only transmits 83 percent of the light, considerably less than glass, and this may limit its use for growing seedlings, cuttings and plants that require high light levels."

Two further points from WSU's table:

  • Polycarbonate is "translucent only" or "not clear." You will not see a crisp view through it, which matters if the greenhouse is meant to look like a garden feature.
  • Multi-wall panels drop to 75 percent transmission. If you choose the warmest polycarbonate, you are choosing the dimmest one too.

In a northern winter, when days are short and the sun is low, light is the thing in shortest supply. That is the strongest argument for glass in a cold climate, and it is a real one.

Lifespan and upkeep

Lifespan and upkeep

WSU lists glass as lasting indefinitely if not broken, and double-wall polycarbonate as providing "good performance for 7 to 10 years," with UV resistance noted as a pro. NC State says rigid double-layer sheets are "usually coated by a UV-inhibitor to extend their life." In practice that means a polycarbonate greenhouse may need re-glazing in the time a glass one simply carries on, and when you buy panels, the UV coating and the side that faces out are worth checking against the maker's instructions.

Condensation. On cold nights, any closed structure collects moisture on its coldest inside surface, and a greenhouse full of plants and damp soil has plenty of moisture to give. The physics is the same one behind condensation in a metal or resin shed: warm, humid air meeting a cold surface. Venting on milder days helps in both.

How to choose for your winter

How to choose for your winter

Work through these in order:

  1. Will you heat it? If yes, insulation drives running cost: lean toward twin-wall or multi-wall polycarbonate, or factory-sealed double glass if you want glass.
  2. Do you get heavy snow or hail? If yes, lean toward polycarbonate or tempered glass, and confirm the model's snow-load statement and your local requirements before you buy.
  3. Are your plants light-hungry in winter? Seedlings, cuttings and high-light plants are where the RHS says polycarbonate's lower transmission may limit you. Glass, or a single-wall layer facing the low winter sun, is the stronger choice here.
  4. Are there children or a busy path nearby? Polycarbonate, or toughened glass at least wherever someone could fall against it, per the RHS.
  5. How long do you plan to keep it? Glass lasts indefinitely if not broken; polycarbonate gives good performance for 7 to 10 years by WSU's table, so budget for panels later.

If your answers split, the most common honest outcome for a cold, snowy yard is twin-wall polycarbonate on a well-anchored frame. If light is your priority and you can protect it from impact, double-glazed or tempered glass is the version of glass that suits a hard winter.

Frequently asked questions

Is polycarbonate warmer than glass in a greenhouse?

By insulation value, yes. Washington State University Extension lists double-wall polycarbonate at R-1.6 to 1.7 and single-layer glass at R-0.9. Factory-sealed double glass reaches R-1.5 to 2.0, closing most of the gap but with less light. No glazing keeps an unheated greenhouse frost-free in a hard freeze.

Does polycarbonate let in enough light?

For most plants, yes, but it is less than glass. The RHS puts clear polycarbonate at 83 percent light transmission against 90 percent for glass, and says this may limit growing seedlings, cuttings and high-light plants. Multi-wall panels transmit less again, 75 percent in WSU's table.

Will a glass greenhouse break under snow?

It can. WSU's table notes single glass may not withstand the weight of snow. Snow tolerance depends on the whole structure, so check the maker's snow-load statement for your model and ask your local building or zoning office what your area requires.

How long does polycarbonate greenhouse glazing last?

WSU Extension lists double-wall polycarbonate as providing good performance for 7 to 10 years, while glass lasts indefinitely if it is not broken. UV-inhibitor coatings, which NC State Extension notes are usual on these sheets, help extend panel life.

Is tempered glass worth it for a greenhouse?

In a family yard or a snowy climate, usually. NC State Extension says tempered glass is two or three times stronger than regular glass, and the RHS recommends toughened glass for doors and anywhere people might fall onto the glass.